Prepare
Cleaning and surface treatment.
PROCESS & QUALITYPowder coating
Powder coating
quality & approvals.
A controlled workflow, careful handling and finish checks aligned with project requirements.
A CONTROLLED ROUTE TO COLOUR
Preparation to protection.
Rinse
Remove residual contaminants.
Coat
Electrostatic powder application.
Cure
Thermal curing to powder specifications.
Inspect
Checks, handling and surface protection.
SURFACE PREPARATIONGood coating starts
Good coating starts
before coating.
A general five-stage pre-treatment sequence. Details vary by substrate and project specification.
Degrease & etch
Remove oils and prepare metal.
Water rinse
Wash away process residues.
DI water rinse
Limit remaining impurities.
Chrome-free treatment
Use a compatible conversion treatment.
Dry-off
Dry parts before powder application.
INSPECTION
Appearance is only the beginning.
Routine inspection methods described in the supplied company profile.
Colour & gloss
Reference-sample comparison and gloss testing.
Film thickness
Coating thickness checks against the agreed specification.
Adhesion & hardness
Cross-cut adhesion and pencil hardness checks.
Impact resistance
Impact performance checks where specified.
Additional project-specific verification
Flexibility, cupping, boiling-water resistance, humidity and salt-spray exposure testing can be discussed according to relevant project requirements.
COMPANY APPROVALS
The documents behind the finish.
Approval documents reproduced in the supplied company profile. Review the issued certificate for scope and validity.
THE COATING JOURNEY / INTERACTIVE 3DFrom bare metal
From bare metal
to a beautiful finish.
Watch the same material batch move through cleaning, rinsing, treatment, drying, coating, curing, inspection and packing.
Preparing your 3D view…
Material processing plays automatically · Drag to rotate · Choose a stage to replay its operation
Clean. Rinse. Prepare.
Chemical pre-treatment
Profiles move through cleaning, rinsing and a compatible chemical conversion treatment.
An illustrative 3D model of the coating workflow. Equipment layout and operating conditions vary by substrate, powder system and project specification.